Agenda - 4-20-15 Reg. Meeting - Laserfiche WebLink

Home Browse Search

10.7.3.3 BUILDING ORIENTATION & EXTERIOR MATERIALS. ors 10.7.3.3.1 All buildings should be designed such that the closest exterior facade is generally parallel to the adjoining thoroughfare or freeway. Figure 10.7 -2. Building Orientation. Appropriate Orientation Thoroughfare / freeway 10.7.3.3.2 Exterior building facades that are in view from an adjoining thoroughfare or freeway shall include one or more of the following elements: brick, wood, stucco, sandstone or other native stone. Use of concrete block, smooth -faced tilt -up concrete panels or pre- fabricated steel panels shall be avoided. 10.7.3.3.3 The following shall be used to determine if a facade shall be required to conform to the exterior finish as set forth in this § 10.7.3.3.2. • All facades that are parallel to an adjoining thoroughfare or freeway shall maintain an exterior finish that conforms to this § 10.7.3.3.2. For lots at the corner of intersection, the secondary street side facade shall also maintain an exterior finish that conforms to this § 10.7.3.3.2. • Side yard facades that are perpendicular from the adjoining thoroughfare or freeway (or secondary street for corner lots) shall have the exterior facade conform to this § 10.7.3.3.2 for a minimum distance of 50% as measured from the corner of the facade closest to the adjoining street (see Figure 10.7 -3). • Any facade that is located such that cannot be viewed from the adjoining thoroughfare or freeway shall be exempt from the requirements of this § 10.7.3.3.2. (see Figure 10.7 -3)