Agenda - 2-16-15 Reg. Meeting - Laserfiche WebLink

Home Browse Search

r� 10.7.3.7 ACCESSORY STRUCTURES. To the greatest extent possible, all accessory structures shall conform to the building design standards of this § 10.7.3. Accessory structures that are to be placed on sites with existing structures that do not conform to the standards within this § 10.7.3 may be designed to conform to the appearance of the existing principal building(s). Draft language for consideration of adding a new Section 10.8 Design Standards for Industrial Development Along Thoroughfares and Freeways: 10.8.1 PURPOSE. The purpose of this Section 10.8 is to provide a regulatory tool that will assist in ensuring that future industrial development and/or redevelopment that may occur along the Town of Broadway, City of Sanford and Lee County's thoroughfares maintains a minimum level of quality in design. The standards as found within this Section require specific design elements that promote a consistent, attractive appearance along our most visible travel corridors. The standards as found within this § 10.8 are supplemental and intended to compliment other design standard as found within this UDO. 10.8.2 APPLICATION. 10.8.2.1 INDUSTIAL DEVELOPMENT. The standards as found within this § 10.8 shall apply to all industrial development or redevelopment (see § 3.2.3.3) that is: (a) To be located on a parcel that has direct frontage onto the right -of -way of a "Freeway/Expressway" or "Thoroughfare" as defined by § 10.7.2.2 of this UDO. (b) Classified in Table 4.6 -1 of this UDO under the land use subheading Industrial and Manufacturing Uses (c) Classified in Table 4.6 -lof this UDO as "Wholesale trade, generally, with operations conducted and merchandise stored entirely within a building and not otherwise listed" as found in the land use subheading General Sales or Service. 10.8.2.2 EXEMPTIONS. The following industrial land uses are not subject to the standards of this § 10.8: • Building lots that were created as part of an office/business park or an industrial park if such lots do not take vehicular access directly from a thoroughfare or freeway as identified in § 10.7.2.2. Such lots shall be exempt only if access is via a secondary street. 10.8.3 FRONT YARD AREA For the purposes of this Section 10.8 all design standards as set forth herein, shall apply only to the designated front yard area (see Appendix A for definition). For corner lots or multiple frontage lots, all property boundaries that face a public street shall be considered a front yard area and shall be subject to the design standards as contained herein. 0